FluxtoFlow™ Electromechanical Actuator System for oil-free stepless capacity control
FluxtoFlow™ an electromechanical actuator system for the stepless capacity control in reciprocating compressors has been completely developed by Dott. Ing. Mario Cozzani S.r.l. in order to meet growing need of energy saving, stability of the process and reduction of emissions.
Industrial applications such as refineries, chemical plants, gas transport and storage require a reliable, quick, precise and, above all, flexible stepless capacity control system so as to suit all end-user needs.
![FluxtoFlow](https://cozzani.com/wp-content/uploads/2024/08/FluxtoFlow.png)
- Stepless capacity control;
- Maximum energy saving;
- Electromechanical actuator: only electrical connections are needed;
- Smoothened compressor flow;
- Entirely oil-free actuation;
- Maximum system adaptability to the process requirements;
- Wide capacity control range (10-100%);
- High dynamic performances;
- Independent control for each actuator;
- Easy installation and maintenance;
- Synchronized acting with the compressor cycle;
- Remote monitoring.
- Maximum compressor speed: 1200 rpm;
- Maximum holding force: 8.000 N
- Capacity Control Range: 10 ÷ 100%;
- Suitable for oil-free or lubricated operating;
- Suitable for corrosive environment;
- Suction valve with plate or ring;
- Maximum number of controlled valves: 32;
- ATEX 2014/34/EU.
** The combination of suction pressure, temperature, valve size, gas type and compressor speed, defines the operating range of the system.
![FluxtoFlow FluxtoFlow](https://cozzani.com/wp-content/uploads/2024/08/quadro-ftf-1000x600.jpg)
![FluxtoFlow | Actuators FluxtoFlow | Actuators](https://cozzani.com/wp-content/uploads/2024/08/ATT00001.gif)
FluxtoFlow™ Working Principle
The FluxtoFlow™ system is based on the reverse flow principle that consists in:
- Making a given quantity of gas flow back into the suction plenum;
- Controlling the capacity of the compressor by keeping the suction valve opened beyond the bottom dead center;
- Compressing only the required gas quantity in order to obtain energy saving.
The innovative control system for suction valves is based on an electromechanical actuator which is operated only by electrical current. The necessary force to control the valve is obtained by means of a magnetic field. The main feature of the actuator provides the name “Flux To Flow” to the system: the magnetic Flux controls the compressor Flow.
- Only power required: holding force is generated by the magnetic field;
- High dynamic performances;
- Built-in position sensor;
- Non linearity of the force-displacement relation: Low Power Consumptions;
- Adjusting device for easy installation;
- ATEX 2014/34/EU.
Thanks to electrical power only, the system generates, for each of the windings inside the actuator, a magnetic field which is adequately intense to attract the movable metallic components and to operate the necessary force to keep the valve shutter open during the compression cycle.